Crushed Stone

Crushed aggregates at 7/8" and smaller, mixed with quarried fines to allow for some compaction.

Also known as "A gravel", it is commonly used as a hard surface for the top coating of gravel roads, driveways, and parking lots.
It can also be used to make concrete (substitute for Granular M).

Crushed gravel at 3/4" minus and mixed with quarried fines to allow for compaction. Used for cement mixing or for top coating for driveways and laneways.

Coarse crushed aggregates at 2” and smaller, mixed with quarried fines to allow for some compaction.

It is commonly used underneath Granular A as a base for the preparation of new roads, driveways, and parking lots.

Coarse crushed aggregate at 6" and smaller, mixed with quarried fines to allow for some compaction.

Commonly used as a base for new roads, driveways, and parking lots when additional support or deep fill is required.

Crushed aggregate with very little to no quarried fines, screened to 1&1/4".

Commonly used for various drainage, but mostly to cover field beds.
It can also serve as a decoratice stone for pathways, flower beds, and foundations.

Blasted and/or crushed crushed aggregate with no quarried fines, available in 6" or 12" rock .

Commonly used for erosion control, slope stabilization, and drainage.
Can also be used as cribbing fill.

A form of rock chips from crushed aggrgate at 1/8" and smaller and mixed with quarried fines.

Commonly used to solidify interlocking or patio stones by placing underneath.
Can also be used for low weight traffic areas such as walkways and paths.

100% blasted rock with fines, sized betwen 18" - 30".

Commnly used as a fill for large/deep holes in new lands.
Can also be used in retaining walls, and barriers.

Ask us about sorted decorative boulders as a landscaping border or centerpiece!